On
Sale Now! $41.95 per pair
|
The
L425 Lynco Biomechanical Orthotic arch support looks like a
cushion insole but is actually an arch support. L425 arch supports
have all the elements of the L420 Lynco
Insoles (including a posted heel wedge to enhance support
to the arch) but have an added metatarsal arch to enhance support
to the ball of the foot. This is particularly useful in treating
problems with the forefoot and toes. |
|
|
Lynco
L425 arch support insoles are suitable for almost any arch
height from low to high. However, people with naturally low
arches may need to take a few days to get used to the feel
of the arch supports and become fully comfortable with them.
Most people with medium to high arches will find the Lynco
insoless immediately comfortable and supportive.
Lynco Insoles are
ideal for people that need considerable arch support but have
tried hard plastic arch supports and found them to be too
uncomfortable to wear. Their triple layer design (discussed
below) creates an extremely supportive foot bed that is amazingly
comfortable and easy to get used to. |
|
Triple
Layer Design For Support and Comfort
The
design of the Lynco orthotic arch supports incorporates
a semi rigid rubber core for stability and support,
surrounded by two distinctive layers of cushioning
foam for unparalleled comfort |
These
arch supports are designed for people with
Medium
& High
Arches |
|
To
determine your own Natural Arch Height
- Click
Here - |
|
|
|
The
Bottom Layer |
The
blue bottom layer of foam on the L425 Lynco arch support Insole is
called Plastazote® foam and it is a closed cell, cross-linked
polyethylene foam. Plastazote® foam is made by a unique high pressure
nitrogen gas solution process that results in a superior polyethylene
foam than other polyethylene foam making technologies. This process
creates an inert foam, free from chemical residues and with a more
uniform and regular cell structure than other foams. The uniform and
regular cell strong and durable. Apex uses this foam on the Lynco
arch supports because it not only provides superior comfort and cushioning
but once the foam is molded (during manufacturing) into the curved,
arch support shape (pictured above) the foam actually has enough internal
strength to add additional support to the arch support thereby improving
its over all function. |
The
Middle Layer (Not Visible In Picture) |
The middle
layer (not visible) is a contoured Pedic™ rubber core. The rubber
core is the main feature that gives Lynco arch supports their long
lasting and high level of support. The rubber core runs from the heel
to the ball of the foot and is contoured to support the medial, lateral
and metatrsal arch. The rubber itself is firm but retains a certain
level of flexibility that plastics cannot. This makes L425 Lynco arch
support insoles more immediately comfortable then most hard plastic
arch supports and orthotics. Once the rubber core is joined to the
contoured bottom layer of Plastazote® the two pieces enhance each
other’s strength and dramatically increase the overall support
and comfort of the arch supports. |
The
Top Layer |
The very top
layer on the L425 Lynco arch support Insole is a blue polyester cover
but right under that is the main top cushion layer. It can be seen
as a strip of black in between the red and the blue layer. This top
cushion layer is a 1/8-inch thick layer of an open cell polyurethane
foam that is particularly soft and bouncy. Its purpose is to add additional
shock absorbing ability and to make the arch supports softer and more
comfortable. The top blue polyester cloth layer is very smooth and
provides a cool, friction free surface against the foot. |
The
Posted Heel Wedge |
 |
A posted
heel wedge means that the inside (medial side) of the heel is
higher than the outside (lateral side). The idea behind this
addition is that if the heel bone (Calcaneus) is resting on
a sloped surface it will be less inclined (pun intended) to
roll inward than if it was resting on a flat surface. This is
a very interesting idea and it does work to provide additional
arch support however some people may not be comfortable standing
on an angled heel surface even though they are getting more
support from the insole. For this reason Feet Relief recommends
that if you have never worn an arch support with a posted heel
wedge and |
unless your doctor specifically
recommended this product for you, you may want to consider trying
the Lynco L405 model which
comes with a level heel (called a neutral heel).
|
L425
Lynco Insoles - Soft Orthotic Arch Supports
On
Sale Now! $41.95 per pair
Sizes that are
not listed below are
No Longer Available
|
Shipping
Options |
Order
Here |
Shipping
Prices |
If
you purchase 1 pair of
Lynco Insole Orthotic
Arch Supports
then you can choose between First Class Mail (5 to 8
days) or Priority Mail (3 to 5 days). For 2
or more pair, please select Priority Mail as they are
too heavy to send via First Class Mail. For detailed
ordering instructions click the button below.
|
|
|
|
|
First
Class |
Priority |
1
Pair |
$3.84 |
$5.90
to $7.30
Varies
Based on Destination
|
2
Pair |
Not
Available |
$5.90
to $7.30
Varies
Based on Destination
|
3
- 4
Pair |
Not
Available |
$6.10
to $11.70
Varies
Based on Destination
|
5
- 6
Pair |
Not
Available |
$6.85
to $15.64
Varies
Based on Destination
|
7
Pair
& Up |
Not
Available |
$7.70
to 18.80& Up
Varies
Based on Destination
|
|
Need
Assistance?
Call Toll Free 888-671-8027
Outside
US Call 415-504-8529 |
|
|