arch supports
about us
contact us
Shipping Information
return policy

Call Us Toll Free 888 671 8027 M-F 10 to 6 Pacific Time

Motion Control
3/4 Length Arch Supports

Attention: This product has been discontinued
by Sof Sole

If you don't see your size listed then we are completely out of stock

To see a very similar arch support by Spenco
- Click Here -
SOF~SOLE Motion Control arch supports are made from a proprietary composite shell called Implex®. Implex® is similar to a fiberglass composite but it is even stronger and more rigid. The Implex® shell is ultra thin yet strong. It fits discretely into athletic and casual walking shoes and provides long lasting support. While the arch on the Motion control arch support is semi-rigid it is not very high so it is ideal for people with medium to low arches that have found other hard arch supports to be too high and uncomfortable.
The semi rigid composite shell of Implex is covered with a cushion layer of IMPLUS. Together the two layers measure to just over 1/16th of an inch thick so they fit into a wide range of different types of shoes.
Sof Sole Motion Control Arch Support  Bottom
Sof Sole Motion Control Arch Support Pair
Sof Sole Motion Control Arch Support  Single
These arch supports are designed for people with Medium to Low Arches
For Low and Medium Arch Height
To determine your own Natural Arch Height
- Click Here -
IMPLUS is a resilient rubber like material that is filled with tiny bubble chambers. IMPLUS is an “Open Cell” foam which means that each tiny bubble chamber is interconnected to the bubbles around it. This “Open Cell” structure makes SOF SOLE cushion insoles unusually shock absorbent for such a thin dense insole. A similar insole that used a “Closed Cell” structure where the bubble chambers were not interconnected would feel much harder then a SOF SOLE cushion insole. Also the “Open Cell” structure used in the SOF SOLE cushion insole means that the insoles are porous and that they breathe. With every step, air flows through the insole wicking away perspiration.
For people that are having trouble adjusting to either a new pair of custom made orthotics or a new pair of serious over-the-counter arch supports such as the Flexifly arch support, the SOF~SOLE Motion Control arch supports is an ideal 'Break-In" arch support. A "Break-In" arch support is an arch support of moderate to low height and rigidity that is used to help people adjust to the sensation of wearing an arch support. A break-in arch support still supports the arch and controls over-pronation but just not as much as the primary arch support; consequently, it feels more comfortable then the primary arch support and allows the foot to slowly adjust to its new corrected position.
Don't Get Taken For The Break-In
A popular arch support store sells break in arch supports that costs over sixty-five dollars!
For $23.95
SOF~SOLE Motion Control Orthotic Arch Support can do the same thing for half the cost.

Sof Sole Motion Control ¾ length Arch Supports
$23.95 Per Pair

Shipping Options
Order Here
Shipping Prices
If you purchase 1 to 2 pair then you can choose between First Class Mail (5 to 8 days) or Priority Mail (3 to 5 days). For 3 or more pair, please select Priority Mail as they are too heavy to send via First Class Mail. For detailed ordering instructions click the button below.
California Sales Tax applies on orders shipped to CA destinations only.
Please select the "International Shipping" setting on the Billing & Shipping check out page for shipping outside the US.
First Class
1 Pair
$5.90 to $7.30
Varies Based on Destination
2 Pair
$5.90 to $7.30
Varies Based on Destination
3 - 5
Not Available
$6.10 to $11.70
Varies Based on Destination
6 - 8
Not Available
$6.85 to $15.60
Varies Based on Destination
9 Pair
& Up
Not Available
$7.70 to $18.80& Up
Varies Based on Destination
Need Assistance?
Call Toll Free 888-671-8027
Outside US Call 415-504-8529